Can’t Figure Out How to Change Ink in Canon Pixma MG3620? Read This!

Running out of ink in the middle of a crucial printing project can be incredibly frustrating. But don’t panic! Changing the ink cartridges in your Canon PIXMA MG3620 is a straightforward process that can be completed in just a few minutes. This guide will walk you through the steps, ensuring a smooth and successful ink cartridge replacement.

Gather Your Supplies

Before you begin, make sure you have the following:

• New Canon PIXMA MG3620 ink cartridges: Ensure you have the correct ink cartridges for your printer model. The Canon PIXMA MG3620 uses two cartridges: one black and one color (typically a tri-color cartridge).
• A clean, dry cloth: This will be used to wipe away any ink spills or smudges.
• A trash bag or container: To dispose of the old ink cartridges properly.

Step 1: Power On and Open the Printer

Begin by turning on your Canon PIXMA MG3620 printer. Next, lift the top cover of the printer to expose the ink cartridge compartment.

Step 2: Locate the Ink Cartridge Holder

Inside the compartment, you will see a carriage holding the ink cartridges. The carriage will move to the center of the compartment when the printer is turned on.

Step 3: Remove the Old Ink Cartridges

Gently press down on the tab located at the top of the ink cartridge. This will release the cartridge.
Carefully pull the old ink cartridge straight out. You may need to apply a slight amount of force, but do not twist or pull the cartridge at an angle.
Repeat the process for the other ink cartridge.

Step 4: Dispose of the Old Cartridges

Place the old ink cartridges in a trash bag or container. Make sure to dispose of them responsibly according to your local recycling guidelines.

Step 5: Install the New Ink Cartridges

Unpack the new ink cartridges. Be careful not to touch the ink nozzles.
Align the new ink cartridge with the empty slot in the carriage.
Gently push the ink cartridge into the slot until it clicks into place.
Repeat the process for the other ink cartridge.

Step 6: Close the Printer Cover

Carefully close the printer cover. The carriage will move back to the right side of the printer.

Step 7: Print a Test Page

Print a test page to ensure the new ink cartridges are installed correctly.
If the test page prints correctly, you have successfully changed the ink cartridges in your Canon PIXMA MG3620 printer.

Ink Cartridge Maintenance Tips

• Store unused ink cartridges in a cool, dry place.
• Do not expose ink cartridges to direct sunlight or extreme temperatures.
• Do not touch the ink nozzles on the ink cartridges.
• Replace ink cartridges when the printer indicates low ink levels.

Final Thoughts: Your Printer is Ready to Print Again!

Now that you’ve successfully changed the ink cartridges in your Canon PIXMA MG3620, you’re ready to print again. Remember to keep a close eye on your ink levels and replace cartridges as needed to ensure your printer continues to perform at its best.

Questions We Hear a Lot

Q: What happens if I don’t replace the ink cartridges when they are low?
A: If you continue to use your printer with low ink cartridges, you risk damaging the print head. This can lead to poor print quality and even printer malfunctions.
Q: Can I use generic or refilled ink cartridges in my Canon PIXMA MG3620?
A: While generic or refilled ink cartridges may be cheaper, they are not always compatible with your printer and can potentially damage your printer. It’s generally recommended to use genuine Canon ink cartridges for optimal performance and longevity.
Q: How often should I replace my ink cartridges?
A: The frequency of ink cartridge replacement varies depending on your printing habits. However, it’s a good idea to replace them when the printer indicates low ink levels.
Q: What should I do if my printer is still not printing properly after changing the ink cartridges?
A: If your printer is still not printing properly, you may need to clean the print head or contact Canon customer support for further assistance.