Don’t Get Frustrated By Your Brother Mfc-j5910dw Ink Cartridge – Here’s How To Change It!

The Brother MFC-J5910DW is a high-quality printer that is known for its reliability, speed, and print quality. However, like all printers, it will eventually run out of ink. When this happens, you will need to replace the ink cartridge. In this blog post, we will show you how to replace the ink cartridge in your Brother MFC-J5910DW. We will also provide some tips and tricks to make the process as quick and easy as possible.

How To Change Ink Cartridge Brother Mfc-j5910dw

Unplug the power cable from your Brother MFC-J5910dw.

Lift up the scanner unit and open the ink cartridge cover.

Press down on the ink cartridge to release it, and then pull it out of the machine.

Remove the new ink cartridge from its packaging, and then shake it gently a few times.

Slide the new ink cartridge into the machine, and then push it in until it snaps into place.

Lower the scanner unit, and then close the ink cartridge cover.

Plug the power cable back into your Brother MFC-J5910dw, and then press the “Power” button to turn it back on.

The printer will automatically recognize the new ink cartridge and prompt you to align the print head if necessary. Follow the on-screen instructions to complete the alignment process.

Once the alignment is complete, the ink cartridge will be ready for use.

How Do I Replace The Ink Cartridge In My Brother Mfc-j5910dw?

• 1. Lift the scanner unit and wait until the ink cartridge carrier moves to the center.
• 2. Press the lock release button and take out the ink cartridge you want to replace.
• 3. Take the new ink cartridge out of its package and remove the protective tape.
• 4. Insert the new ink cartridge into the ink cartridge carrier and push it down until it clicks into place.
• 5. Lower the scanner unit and wait for the ink cartridge carrier to move to the left.

How Do I Remove The Old Ink Cartridge From My Brother Mfc-j5910dw?

Removing an old ink cartridge from your brother MFC-j5910dw is easy. Follow these steps:

1. Turn the power on.

2. Open the paper tray.

3. Lower the output tray extender.

4. Open the top cover.

5. Press the ink cartridge cover release button.

6. Remove the ink cartridge from the machine.

7. Close the top cover.

8. Raise the output tray extender.

9. Close the paper tray.

Note: If the old ink cartridge is jammed, you can try the following:

1. Press and hold the START/CANCEL button for 10 seconds.

2. Press the UP or DOWN arrow button to select “Initial Setup.”

3. Press the OK button.

4. Press the UP or DOWN arrow button to select “Cleaning.”

5. Press the OK button.

6. The machine will start cleaning the print head.

If the cleaning does not work, you can try the following steps:

1. Press and hold the INK key until the machine beeps.

2. Release the INK key.

3. Press and hold the INK key again until the machine is silent.

4. Release the INK key.

5. Press and hold the INK key again until the machine is silent.

6. Release the INK key.

How Do I Install The New Ink Cartridge In My Brother Mfc-j5910dw?

To install a new ink cartridge in your Brother MFC-J5910DW, follow these simple steps:

1. Remove the old ink cartridge: Press the release button to open the ink cartridge cover. Wait for the ink cartridge holder to move to the center of the machine. Press down on the ink cartridge you want to install to release it, then remove it from its packaging.

2. Install the new ink cartridge: Slide the new ink cartridge into the empty slot. You will hear it click into place when it is installed correctly.

3. Close the ink cartridge cover: Press down on the ink cartridge cover to close it.

4. Align the print head: Press the “Menu” button on your Brother MFC-J5910DW. Use the arrow keys to scroll to the “Machine” menu, then press the “OK” button. Use the arrow keys to scroll to the “Alignment” menu, then press the “OK” button. Follow the on-screen instructions to align the print head.

5. Print a test page: Press the “Menu” button. Use the arrow keys to scroll to the “Print Report” menu, then press the “OK” button.

How Do I Reset My Brother Mfc-j5910dw After Replacing The Ink Cartridge?

To reset your Brother MFC-J5910dw after replacing the ink cartridge, follow these steps:

1. Press the “Menu” button on your Brother MFC-J5910dw control panel.

2. Use the up and down arrows to select “Machine Settings.”

3. Press the “OK” button.

4. Use the up and down arrows to select “All Settings.”

5. Press the “OK” button.

6. Use the up and down arrows to select “Reset.”

7. Press the “OK” button.

8. Use the up and down arrows to select “Yes.”

9. Press the “OK” button.

Your Brother MFC-J5910dw should now be reset. If the issue persists, please contact Brother customer service for additional assistance.

How Do I Clean The Print Head On My Brother Mfc-j5910dw?

The print head on your brother MFC-j5910dw can be cleaned by following these simple steps:

1. To clean the print head, you will need to remove the ink cartridges. To do this, press on the release lever on the front of the printer and pull the ink cartridge out.

2. Once you have removed the ink cartridge, gently wipe the print head with a soft cloth or cotton swab to remove any excess ink.

3. Next, reinstall the ink cartridge by aligning it with its slot and pushing it in until it clicks into place.

4. Finally, print a test page to ensure that the print head is clean and working properly.

By following these steps, you should be able to clean the print head on your Brother MFC-j5910dw and have it working like new again!

In a nutshell

In conclusion, changing the ink cartridge in a Brother MFC-J5910DW is a quick and easy process. By following these simple steps, you can avoid any frustration and ensure that your printer is back up and running in no time. Remember, always consult the user manual for specific instructions and safety precautions.