What to know
- Hold the cartridge upright and gently shake it from side to side a few times to distribute the toner evenly.
- Push the lever on the right side of the toner cartridge back into the locked position.
- Once the initialization is complete, print a test page to ensure the toner cartridge is installed correctly and printing properly.
Are you experiencing faded prints or seeing the dreaded “low toner” warning on your Brother HL-L2350DW printer? It’s time to replace the toner cartridge! This comprehensive guide will walk you through the process of changing toner on your Brother HL-L2350DW, ensuring smooth and efficient printing once again.
Gather Your Supplies
Before you begin, make sure you have the following:
- New Brother TN760 Toner Cartridge: Ensure the toner cartridge is compatible with your HL-L2350DW model.
- Gloves: Optional, but recommended to protect your hands from toner dust.
- Paper Towels: Useful for cleaning up any toner spills.
Power Down and Open the Front Cover
1. Turn off your printer: Press the power button on the front panel to completely shut down the HL-L2350DW.
2. Open the front cover: Locate the front cover release latch and gently pull it open.
Remove the Old Toner Cartridge
1. Locate the toner cartridge: Inside the printer, you’ll see the toner cartridge housed in a black compartment.
2. Release the lock: On the right side of the toner cartridge, you’ll find a small lever. Gently pull this lever towards you to unlock the cartridge.
3. Lift and remove: Carefully lift the toner cartridge straight up and out of the printer.
Dispose of the Old Cartridge Properly
1. Recycle or dispose: Check your local recycling program or toner cartridge manufacturer for proper disposal instructions.
2. Protect yourself: Toner dust can be irritating, so wear gloves and avoid inhaling the dust.
Prepare the New Toner Cartridge
1. Remove the protective tape: Before installing the new toner cartridge, carefully peel off all the protective tape and seals.
2. Shake gently: Hold the cartridge upright and gently shake it from side to side a few times to distribute the toner evenly.
Install the New Toner Cartridge
1. Align the cartridge: Hold the new toner cartridge by its handles and carefully align it with the slot inside the printer.
2. Slide the cartridge in: Gently push the cartridge into the slot until it clicks into place.
3. Lock the cartridge: Push the lever on the right side of the toner cartridge back into the locked position.
Close the Cover and Power On
1. Close the front cover: Gently close the front cover of the printer.
2. Power on the printer: Press the power button to turn your HL-L2350DW back on.
Final Steps and Troubleshooting
1. Wait for initialization: Your printer will go through an initialization process, which may take a few minutes.
2. Print a test page: Once the initialization is complete, print a test page to ensure the toner cartridge is installed correctly and printing properly.
Printing Perfection: Enjoy Your New Toner
Congratulations! You’ve successfully replaced the toner cartridge in your Brother HL-L2350DW printer. Now you can enjoy crisp, clear prints for all your documents and projects.
Frequently Discussed Topics
Q: How often do I need to change the toner cartridge?
A: The frequency of toner cartridge replacement depends on your printing usage. Generally, a toner cartridge can last for about 1,200 pages. However, factors like print quality settings and the type of documents you print can impact this.
Q: What if my printer still shows a low toner warning after replacing the cartridge?
A: If the low toner warning persists after replacing the cartridge, there could be a few reasons:
- The new cartridge may be defective: Try contacting Brother support for a replacement cartridge.
- The toner chip may not be properly recognized: Ensure the toner chip is clean and properly installed.
- The printer may need a reset: Try turning the printer off and on again or resetting it to factory settings.
Q: Can I use a generic toner cartridge instead of a Brother brand cartridge?
A: While generic toner cartridges may be cheaper, they can sometimes lead to printing issues or damage your printer. It’s generally recommended to use Brother brand toner cartridges for optimal performance and longevity.
Q: What should I do if I spill toner dust?
A: If you spill toner dust, avoid inhaling it and wear gloves to clean up the spill. Use a damp cloth or paper towel to wipe up the dust and dispose of it properly.