How To Change The Toner In An Hp Laserjet Pro M402dne: A
What To Know
- In this blog post, we will cover how to change the toner cartridge in the HP LaserJet Pro M402dne.
- Hold the new toner cartridge by the handle and insert the cartridge into the printer, aligning it with the slots on each side.
- It is important to use genuine HP toner cartridges to ensure the highest quality prints and prevent damage to the printer.
Intro paragraph:
The HP LaserJet Pro M402dne is a high-quality printer that is known for its reliability, performance, and ease of use. However, like all printers, the toner cartridge will eventually need to be replaced. In this blog post, we will cover how to change the toner cartridge in the HP LaserJet Pro M402dne.
How To Change Toner Hp Laserjet Pro M402dne
To change the toner in an HP LaserJet Pro M402dne, follow these simple steps:
1. Open the front cover of the printer.
2. Remove the toner cartridge by grasping the handle and pulling it out of the printer.
3. Take the new toner cartridge out of its packaging and remove the protective tape.
4. Hold the new toner cartridge by the handle and insert the cartridge into the printer, aligning it with the slots on each side.
5. Gently push the toner cartridge into the printer until it clicks into place.
6. Close the front cover of the printer.
7. Check the printer’s control panel to ensure that the new toner cartridge is detected and ready for use.
Note: It is important to use genuine HP toner cartridges to ensure the highest quality prints and prevent damage to the printer.
How Do I Open The Toner Door On My Hp Laserjet Pro M402dne?
- 1. Locate the power button on your printer and hold it for 3 seconds.
- 2. Release the power button and wait for the printer to turn on.
- 3. The printer’s control panel will display a message asking if you want to open the toner door.
- 4. Press the “Yes” button to continue.
- 5. The toner door will now open automatically.
How Much Toner Does My Hp Laserjet Pro M402dne Use?
Your HP LaserJet Pro M402dne printer uses 1 unit of HP 90A (CE390A) toner cartridges. The toner cartridge has a capacity of 2,000 pages. This means that if you print 1,000 pages, the cartridge will be empty and you will need to replace it.
To calculate the page yield, divide the number of pages printed by the number of pages the cartridge can handle. In this case, the page yield is 1,000 pages / 2,000 pages = 0.5 units.
Keep in mind that page yields are based on standard 5% coverage. If you print more pages with denser text or images, the page yield will be lower.
It is also important to note that the page yield is an estimate based on HP’s standard 5% coverage. If you print more pages with dense text or images, the page yield will be lower.
Additionally, the page yield is based on HP’s country/region specific test methods. Results may vary depending on the printing patterns of the customer.
How Do I Remove The Old Toner Cartridge From My Hp Laserjet Pro M402dne?
To replace the toner cartridge in your HP LaserJet Pro M402dne printer, follow these steps:
1. Open the front door of the printer.
2. Grasp the handle of the toner cartridge drawer and pull it straight out.
3. Remove the toner cartridge from the drawer by grasping the handle and pulling it straight up and out.
4. Remove the plastic protective covering from the new toner cartridge by gently pulling on the tab.
5. Insert the new toner cartridge into the drawer with the handle facing up.
6. Slide the drawer back into the printer and close the door.
7. Your printer will automatically prompt you to align the toner cartridge. Follow the on-screen instructions to complete the process.
Note: It’s important to replace the toner cartridge when prompted by the printer, or when print quality begins to deteriorate.
How Do I Install The New Toner Cartridge In My Hp Laserjet Pro M402dne?
To install the new toner cartridge in your HP LaserJet Pro M402dne, follow these steps:
1. Open the front door of your HP LaserJet Pro M402dne printer. The front door is located on the left side of the printer.
2. Pull out the old toner cartridge from the printer.
3. Remove the new toner cartridge from the packaging.
4. Gently shake the new toner cartridge from side to side five or six times to distribute the toner evenly.
5. Remove the protective cover from the new toner cartridge.
6. Hold the new toner cartridge by its handle and slide it into the printer until it snaps into place.
7. Close the front door of the printer.
8. The printer will automatically initialize the new toner cartridge. This process may take a few moments.
9. Once the initialization process is complete, the printer will print a configuration page.
10. Open the cartridge door and pull out the configuration page from the output tray.
11. Recycle the empty toner cartridge according to local regulations.
By following these steps, you can install the new toner cartridge in your HP LaserJet Pro M402dne printer quickly and easily.
How Do I Reset The Toner Level On My Hp Laserjet Pro M402dne?
To reset the toner level on your HP LaserJet Pro M402dne, follow these steps:
1. Press the “Cancel” button on your printer’s control panel.
2. Open the front cover of your printer.
3. Locate the toner chip on the toner cartridge.
4. Hold down the “Cancel” button and the “Go” button at the same time for three seconds.
5. Release both buttons.
6. Close the front cover of your printer.
7. Press the “OK” button on your printer’s control panel.
Your printer’s toner level should now be reset. Note that this process will not work if the toner cartridge is completely empty. You will need to replace the toner cartridge with a new one before you can use the reset procedure.
In a nutshell
In conclusion, changing the toner in an HP LaserJet Pro M402dne is a simple process that can be completed in a few minutes. By following the step-by-step instructions provided in this article, you can ensure that your printer continues to operate at peak performance. Remember to purchase replacement toner cartridges from a reputable source, and to store them safely until needed.
