How To Disassemble A Corsair K63: A Step-by-step Guide
What To Know
- To disassemble a Corsair K63, you will need to remove the screws that hold the keyboard together.
- Once the keys are removed, you can clean the inside of the keyboard with a soft cloth or a vacuum.
- To remove the switches, use a pair of tweezers or a small screwdriver to gently lift them from the PCB.
Corsair K63 is one of the best gaming keyboards on the market, and it comes with a detachable wrist rest. However, if you want to clean it or customize it, you’ll need to know how to disassemble it. In this blog post, we’ll show you how to take apart your Corsair K63 gaming keyboard.
How To Disassemble Corsair K63
To disassemble a Corsair K63, you will need to remove the screws that hold the keyboard together. The screws are hidden under rubber feet, so you will need to peel them off to access the screws. Once you have removed the screws, you can separate the top and bottom halves of the keyboard.
To remove the keys, you will need to pry them off with a screwdriver. The keys are held in place by small plastic clips, so be careful not to damage them. Once the keys are removed, you can clean the inside of the keyboard with a soft cloth or a vacuum.
To reassemble the keyboard, simply reverse the process. Replace the keys, and screw the top and bottom halves of the keyboard back together. Make sure the screws are tight, and replace the rubber feet.
It is important to note that disassembling a Corsair K63 voids the warranty. If you are not comfortable performing this repair yourself, we recommend taking your keyboard to a professional.
What Tools Do I Need To Disassemble A Corsair K63?
- 1. A Phillips head screwdriver
- 2. A small flat head screwdriver
- 3. A plastic pry tool
- 4. A soft cloth or towel
How Do I Remove The Keycaps From A Corsair K63?
Keycap removal on the Corsair K63 is a relatively straightforward process. However, since these keys have a “stem” that is glued into the keyboard, you are going to have to be very careful and deliberate.
To start, unplug your keyboard from any power source. Next, flip your keyboard over so you are looking at the back. Using a plastic tool, such as a guitar pick, carefully pry up one side of the keycap. Once you have lifted the edge, you should be able to pull the keycap off.
If you have trouble, you can try using a heat gun to loosen the glue. Be careful not to overheat the keyboard, as this can damage the internals.
Once the keycap is removed, you can clean the keyboard and replace the caps. Be sure to use gentle cleaners, as harsh chemicals can damage the plastic components of the keyboard.
Once the keycaps are removed, you can clean the keyboard and replace the caps. Be sure to use gentle cleaners, as harsh chemicals can damage the plastic components of the keyboard.
How Do I Remove The Switches From A Corsair K63?
First, remove the keycaps. The Corsair K63 uses Cherry MX switches, which are standard mechanical switches. To remove the keycaps, simply pry them up with a keycap puller. Be careful not to bend or break the switches.
Once the keycaps are off, you should see the spring mechanism and the printed circuit board (PCB). To remove the switches, use a pair of tweezers or a small screwdriver to gently lift them from the PCB. Be careful not to damage the PCB or the springs.
Once you have removed the switches, you can clean the PCB and springs with a cloth or brush. You can also replace the switches with new ones or with a different type, such as Cherry MX Brown or Cherry MX Blue.
Finally, replace the keycaps and enjoy a clean and customized Corsair K63 mechanical gaming keyboard!
How Do I Remove The Metal Plate From A Corsair K63?
To disassemble a Corsair K63 keyboard, you will need to remove the metal plate first. This metal plate is underneath the keys and can be removed by unscrewing the screws that hold it in place.
The screws are located on the underside of the keyboard, under the keycaps. You will need to carefully lift the keycaps to access the screws. Once you have removed the screws, the metal plate will come off and you will be able to remove the keycaps.
To reassemble the keyboard, simply replace the keycaps and screw the metal plate back into place. Be sure to tighten all of the screws securely.
It is important to note that disassembling a Corsair K63 keyboard may void your warranty. If you are unable to remove the metal plate or reassemble the keyboard, it is best to contact Corsair for assistance.
How Do I Remove The Screws From A Corsair K63?
Removing the screws from a Corsair K63 keyboard is a relatively straightforward process.
First, you’ll need a flathead screwdriver or a similar prying tool. Insert the screwdriver into the small gap between the keyboard and the backplate, and use it to gently lift the backplate away from the keyboard. Be careful not to damage the keyboard or the backplate during this process.
Once the backplate is removed, you should see the screws that hold it in place. Carefully remove the screws and set them aside.
With the screws removed, you should be able to lift the backplate away from the keyboard and remove it completely. You can then remove the keycaps from the keyboard to access the switches underneath.
If you’re replacing the switches, simply remove them and replace them with new ones. If you’re simply cleaning the keyboard, you can use a can of compressed air to blow out any dust or debris that may have accumulated.
Once the switches are replaced or the keyboard is cleaned, you can put the backplate back on and replace the screws. Be careful not to over-tighten the screws, as this can damage the keyboard.
And that’s it! You’ve successfully removed the screws from your Corsair K63 keyboard.
Summary
In conclusion, the disassembly of a Corsair K63 is a fairly straightforward process, but it’s important to take your time and be careful. With a little patience and the right tools, you can easily take apart your keyboard and give it a good cleaning.
