Fix Acer Swift 3 No Bootable Device – Simple Steps to Get Your Laptop Up and Running Again
What To Know
- The Acer Swift 3 requires a specific power adapter, and using a different one can cause the laptop to not boot.
- If the computer is turned off or the battery is dead, it won’t be able to boot.
- If a virus scan doesn’t fix the problem, you can try booting from a bootable USB drive.
The Acer Swift 3 is a budget-friendly laptop that is known for its performance and portability. However, like all laptops, it can run into problems. One such problem is when the laptop says “no bootable device.” This can be a frustrating issue, but don’t worry, there are ways to fix it. In this article, we’ll show you how to fix an Acer Swift 3 that says “no bootable device.
How To Fix Acer Swift 3 No Bootable Device
The Acer Swift 3 is a budget laptop that offers good performance and battery life. However, some users have reported that their Acer Swift 3 is not booting up. If you are experiencing this issue, there are a few things you can do to try and fix it.
First, make sure that you have the correct power adapter plugged in. The Acer Swift 3 requires a specific power adapter, and using a different one can cause the laptop to not boot.
Next, try restarting the laptop. Sometimes, a simple restart can fix the issue. If that doesn’t work, you can try booting into Safe Mode. To do this, shut down your laptop, then press the power button to turn it back on. Immediately press and hold the “F8” key on your keyboard. This will bring up a menu with several options. Choose “Safe Mode” from the menu, and then follow the prompts to boot into Safe Mode.
Once you’re in Safe Mode, you can try running a virus scan. It’s possible that a virus is causing the issue.
If none of these steps work, you may need to contact Acer for further assistance. They may be able to send you a new power adapter or help you troubleshoot the issue.
{What Are The Common Causes Of ‘no Bootable Device’ Error On Acer Swift 3?}.
- 1. Corrupted hard drive
- 2. Damaged boot sector
- 3. Incorrect boot order
- 4. Insufficient power
{How Do I Diagnose The Problem If My Acer Swift 3 Displays The ‘no Bootable Device’ Error?}.
If you’ve received an “No bootable device” error on your Acer Swift 3, the first thing you should do is try to diagnose the problem. There are a few steps you can take to try and identify the cause of the error.
First, make sure that your Acer Swift 3 is turned on and connected to the power outlet. If the computer is turned off or the battery is dead, it won’t be able to boot.
Next, try restarting your computer. Sometimes, a simple restart can fix the problem.
If restarting doesn’t work, you can try booting into Safe Mode. To do this, restart your computer and press the F8 key repeatedly during startup. When the Advanced Boot Options menu appears, select Safe Mode with Networking.
Once you’re in Safe Mode, you can try running a virus scan. It’s possible that a virus is causing the problem.
If a virus scan doesn’t fix the problem, you can try booting from a bootable USB drive. To do this, you’ll need to have a USB drive with at least 8 GB of free space. Then, download a Windows 10 installation media tool and create a bootable USB drive.
Once you’ve created a bootable USB drive, restart your computer and press the F12 key repeatedly during startup. When the Boot Menu appears, select the USB drive.
Finally, you can try reinstalling Windows 10. To do this, you’ll need to back up your data and then format your Acer Swift 3. Then, use the bootable USB drive to install Windows 10.
If none of these steps work, it’s possible that there’s a problem with the hardware. In this case, you’ll need to take your Acer Swift 3 to a repair shop.
{What Are Some Troubleshooting Steps To Fix The ‘no Bootable Device’ Error On My Acer Swift 3?}.
1. Restart the computer: A simple restart can sometimes fix minor software glitches that may be causing the error.
2. Check the boot order: Ensure that the hard drive is set as the primary boot device in the BIOS settings. To do this, restart the computer and press the F2 or Del key to enter the BIOS settings. Then, navigate to the Boot tab and change the boot order accordingly.
3. Check the hard drive connection: Check if the connection between your hard drive and the system board is secure. Disconnect and reconnect the hard drive cable to ensure that the connection is firm.
4. Test the hard drive: Run a diagnostic test on the hard drive to identify any physical or logical errors. You can do this by inserting the Windows installation media or a recovery drive and selecting the “Repair your computer” option. Then, select the “Troubleshoot” option, followed by the “Advanced options” and finally, the “Command Prompt”. In the Command Prompt, run the “chkdsk” command to check and fix any errors on the hard drive.
{How Can I Restore My Acer Swift 3 To Factory Settings If The ‘no Bootable Device’ Error Persists?}.
The “No bootable device” error can be frustrating, especially when it occurs on your Acer Swift 3. But don’t worry, there are a few things you can do to try and fix it.
First, try restarting your computer. Sometimes, this error can be fixed by simply restarting your device. If that doesn’t work, you can try booting into Safe Mode. To do this, restart your computer and repeatedly press F8 or F12 (depending on your model) during the boot process. This will bring up the Advanced Boot Options menu, where you can select the Safe Mode option.
Once you’re in Safe Mode, you can try running the System Restore tool. This tool allows you to restore your Acer Swift 3 to a previous state, when it was working properly. To do this, open the Start menu, search for “System Restore,” and select the first result. Follow the prompts to restore your system.
If System Restore doesn’t work, you can try performing a factory reset. This will completely erase all of your data, so make sure you have a backup before proceeding. To perform a factory reset, restart your computer and repeatedly press Alt + F10 (depending on your model) during the boot process. This will bring up the Recovery options. Select “Restore Factory Settings” and follow the prompts to reset your device.
{Are There Any Specific Acer Swift 3 Models That Are More Prone To Experiencing The ‘no Bootable Device’ Error?}.
Yes, there are several Acer Swift 3 models that are more susceptible to experiencing the “no bootable device” error. The Acer Swift 3 SF314-41-R9YN, Acer Swift 3 SF314-41-R6YN, and Acer Swift 3 SF314-42-R7YN are among those models that have been reported to have a higher incidence of this error.
The “no bootable device” error typically occurs when the computer is unable to detect the operating system or the boot device. This can be caused by a variety of issues, such as a faulty hard drive, a corrupt operating system, or a damaged BIOS.
If you are experiencing the “no bootable device” error on your Acer Swift 3, there are several steps you can take to troubleshoot and resolve the issue. First, you can try restarting the computer and entering the BIOS setup by pressing a specific key during the boot process. In the BIOS setup, you can try changing the boot order or performing a BIOS update.
If the issue persists, you can try connecting a bootable USB drive or DVD and booting from it. This will allow you to access a recovery environment or perform an operating system repair.
If none of these steps resolve the issue, you may need to contact Acer customer support for assistance.
Final Thoughts
In conclusion, the Acer Swift 3 no bootable device issue can be a frustrating problem, but by following these simple troubleshooting steps, you should be able to get your machine back up and running in no time! Remember, it’s always best to back up your data before attempting any repairs or updates to your computer.
