How To Open Your Razer Basilisk X Hyperspeed: The Simple Guide
What To Know
- While the mouse is easy to use, there are a few steps you need to take in order to pair it with your computer and start using it.
- Here is an overview of the steps you need to take in order to open Razer Basilisk X Hyperspeed and start using it.
- Connect the charging cable to the port on the mouse, and then plug the other end of the cable into a USB port on your computer.
Razer Basilisk X HyperSpeed is a gaming mouse that is known for its performance and customization. This mouse has a variety of features that make it stand out from other gaming mice on the market. However, it can be difficult to figure out how to open Razer Basilisk X HyperSpeed. In this article, we will walk you through the process of opening Razer Basilisk X HyperSpeed and show you how to customize it to your needs.
How To Open Razer Basilisk X Hyperspeed
Razer Basilisk X Hyperspeed is an advanced gaming mouse from Razer that is packed with features to enhance your gaming experience. While the mouse is easy to use, there are a few steps you need to take in order to pair it with your computer and start using it. Here is an overview of the steps you need to take in order to open Razer Basilisk X Hyperspeed and start using it.
1. Remove the Razer Basilisk X Hyperspeed from its packaging.
2. Locate the wireless dongle that comes with the mouse.
3. Connect the wireless dongle to a free USB port on your computer.
4. Turn on the Razer Basilisk X Hyperspeed by pressing and holding the power button for about three seconds.
5. The mouse should now be ready to use.
You can also customize the performance of the Razer Basilisk X Hyperspeed by using Razer’s Synapse software.
Razer Basilisk X Hyperspeed is a lightweight gaming mouse that weighs only 3.3 ounces. The mouse has a built-in battery that can last up to 285 hours on a single charge. The mouse also has 11 programmable buttons, including a dedicated DPI button and a scroll wheel that can be tilted. The Razer Basilisk X Hyperspeed is compatible with Windows and Mac computers.
How Do I Adjust The Dpi On My Razer Basilisk X Hyperspeed?
- 1. Adjust the DPI on your Razer Basilisk X Hyperspeed by using the DPI buttons located on the bottom of the mouse.
- 2. Press and hold the DPI button to cycle through the different DPI settings, and release the button once you have selected the desired DPI.
- 3. The DPI settings on the Razer Basilisk X Hyperspeed can be adjusted from 200 DPI to 16,000 DPI in increments of 100 DPI.
- 4. To change the polling rate of the mouse, go into the mouse’s software and adjust the polling rate to the desired setting.
- 5. If you are experiencing issues with the mouse’s DPI settings, try reinstalling the mouse’s software or performing a factory reset on the mouse.
How Do I Customize The Lighting On My Razer Basilisk X Hyperspeed?
A:
Razer Basilisk X Hyperspeed has customizable lighting which can be adjusted through the Razer Synapse 3 software. You can customize the color, brightness, and effects of the light.
To customize the lighting on your Razer Basilisk X Hyperspeed, follow these steps:
1. Download and install Razer Synapse 3 software on your computer.
2. Launch Razer Synapse 3 and connect your Razer Basilisk X Hyperspeed to your computer using a USB cable.
3. Click on the “Lighting” tab on Razer Synapse 3.
4. Adjust the lighting settings according to your preferences. You can change the color of the lighting, adjust the brightness, and enable or disable lighting effects such as breathing, wave, and reactive.
5. Click “Apply” to save the changes.
Note: You may need to restart your computer for the changes to take effect.
How Do I Connect My Razer Basilisk X Hyperspeed To My Computer?
To connect your Razer Basilisk X Hyperspeed to your computer, follow these steps:
1. First, ensure that your Basilisk X Hyperspeed has been charged and is turned on.
2. Locate the charging port on the bottom of the mouse.
3. Connect the charging cable to the port on the mouse, and then plug the other end of the cable into a USB port on your computer.
4. Once the charging cable is connected, your mouse should automatically begin pairing with your computer.
5. If pairing does not begin automatically, you can manually initiate pairing by pressing and holding down the “DPI” and “Scroll Wheel” buttons on the mouse until the lights begin flashing.
6. Once the lights begin flashing, release the buttons and wait for your mouse to pair. This process may take a few moments.
7. Once the pairing process is complete, your mouse should be connected to your computer and ready to use.
If you encounter any issues during pairing, you can try unplugging the charging cable and then reconnecting it, or restarting your computer. If these steps do not resolve the issue, you may need to consult the Razer Basilisk X Hyperspeed manual or contact Razer customer support for assistance.
How Do I Change The Polling Rate On My Razer Basilisk X Hyperspeed?
To change the polling rate on your Razer Basilisk X Hyperspeed, you’ll need to use Razer Synapse, the software that comes bundled with your gaming mouse. Here are the steps you’ll need to follow:
1. Open Razer Synapse.
2. Click on the “Performance” tab in the left-hand menu.
3. Click the “Mouse” icon in the menu that appears, and then click the “Polling Rate” drop-down menu.
4. Choose the polling rate you want to use, from 125 Hz to 1000 Hz.
5. Click “Apply” to save the changes.
It’s worth noting that a higher polling rate can result in a smoother and more responsive gaming experience, but it can also put additional strain on your CPU and graphics card, so you may need to experiment with different rates to find the one that works best for you.
How Do I Adjust The Lift Distance On My Razer Basilisk X Hyperspeed?
Lift distance refers to the distance your mouse lifts off the surface during a movement. It can be adjusted on your Razer Basilisk X Hyperspeed by accessing the Razer Synapse software. To do this, follow these steps:
1. Open Razer Synapse: Go to the Razer Synapse website and download the latest version of the software. Install it on your computer and launch the program.
2. Connect your mouse: Make sure your mouse is plugged into your computer and turned on. Once it is recognized by Synapse, it will appear in the list of connected devices.
3. Access the mouse settings: Click on the “Mouse” tab in Synapse. This will display all the options available for customizing your mouse.
4. Adjust the lift distance: Look for the “Lift Distance” setting. This setting is usually represented by a slider or a numerical value. Move the slider or enter the value you prefer to adjust the lift distance.
5. Test the lift distance: Once you have made your adjustments, test your mouse to see if the lift distance is to your liking. If it is, save your changes and close Synapse.
It is important to note that the lift distance setting will affect the overall sensitivity of your mouse, so you may need to experiment with different settings to find what works best for you.
Final Thoughts
In conclusion, the Razer Basilisk X HyperSpeed is a top-notch gaming mouse that offers excellent performance and versatility. Its ergonomic design, lightweight construction, and customization options make it a great choice for gamers of all levels. With its fast performance and wireless connectivity, the Razer Basilisk X HyperSpeed is sure to enhance your gaming experience.
