Your Guide to Laptop Confidence.

Brother Printer HL-L2395DW Drum Replacement: Expert Tips & Tricks

At a Glance

  • The drum unit is responsible for transferring toner to the paper, and over time, it can wear out, leading to print quality issues like faded or uneven prints.
  • The drum unit is located on the right side of the printer, beneath the toner cartridge.
  • Hold the new drum unit with the handle facing you and carefully align it with the slot in the printer.

The Brother HL-L2395DW is a reliable and efficient printer, but like all machines, it requires regular maintenance. One crucial component that needs replacing is the drum unit. The drum unit is responsible for transferring toner to the paper, and over time, it can wear out, leading to print quality issues like faded or uneven prints. If you’re experiencing these problems, it’s time to learn how to replace the drum unit on your Brother HL-L2395DW.
This guide will walk you through the process step-by-step, ensuring a smooth and successful replacement. With a few simple steps, you can restore your printer to its optimal performance and enjoy crisp, clear prints once again.

Gather Your Supplies

Before you begin, ensure you have the following items:

  • New Brother HL-L2395DW Drum Unit: Make sure you buy the correct drum unit specifically designed for your model.
  • Gloves: This is optional but recommended to keep your hands clean.
  • A Flathead Screwdriver: You’ll need this to open the printer’s front cover.
  • A Trash Bag: To dispose of the old drum unit properly.

Power Off and Disconnect the Printer

1. Turn off the printer: Press the power button on the printer to shut it down completely.
2. Disconnect the power cord: Unplug the printer from the power outlet to prevent any electrical hazards.

Open the Front Cover

1. Locate the front cover release: Look for a small lever or button on the right side of the printer’s front cover.
2. Release the cover: Gently press the lever or button to release the front cover.
3. Open the cover: Carefully lift the front cover upwards and swing it open.

Remove the Old Drum Unit

1. Locate the drum unit: The drum unit is located on the right side of the printer, beneath the toner cartridge.
2. Release the drum unit: Look for a lever or button on the drum unit itself. Push this lever or button to release the drum unit.
3. Pull out the drum unit: Carefully pull the drum unit out of the printer.

Dispose of the Old Drum Unit

1. Place the old drum unit in a trash bag: Dispose of the old drum unit responsibly. Do not throw it in the regular trash.
2. Recycle the old drum unit if possible: Check with your local recycling center or manufacturer for recycling options.

Install the New Drum Unit

1. Remove the new drum unit from its packaging: Carefully unpack the new drum unit.
2. Align the drum unit: Hold the new drum unit with the handle facing you and carefully align it with the slot in the printer.
3. Insert the drum unit: Gently push the drum unit into the slot until it clicks into place.

Close the Front Cover

1. Ensure the drum unit is securely in place: Make sure the drum unit is fully inserted and locked.
2. Close the front cover: Gently lower the front cover and push it until it clicks shut.

Power On and Test the Printer

1. Plug in the power cord: Connect the printer back to the power outlet.
2. Turn on the printer: Press the power button to switch on the printer.
3. Print a test page: Print a test page to ensure the new drum unit is installed correctly and functioning properly.

Drum Unit Replacement: Final Thoughts

Replacing the drum unit on your Brother HL-L2395DW is a simple and straightforward process that can be done by anyone. Following these steps will help you ensure a smooth replacement, restoring your printer to its optimal printing performance. Remember to always use genuine Brother parts for the best results and longevity.

Information You Need to Know

1. How often should I replace the drum unit?
The drum unit typically lasts for around 23,000 pages. However, the actual lifespan may vary depending on your printing habits and the type of toner you use.
2. What happens if I don’t replace the drum unit?
If you don’t replace the drum unit when it’s worn out, you’ll start to experience print quality issues like faded or uneven prints. In extreme cases, the drum unit can even damage your printer.
3. Can I recycle the old drum unit?
Yes, most drum units can be recycled. Check with your local recycling center or Brother for recycling options.
4. What are the signs that my drum unit needs replacing?
Some common signs include:

  • Faded or uneven prints
  • Black streaks or lines on the printed page
  • Toner powder on the paper
  • A message on the printer display indicating a drum unit error

5. Can I use third-party drum units?
While you can use third-party drum units, they may not be compatible with your printer or provide the same quality as genuine Brother parts. It’s always recommended to use genuine Brother parts for optimal performance and longevity.

Was this page helpful?No
D
About the Author
Davidson is the founder of Techlogie, a leading tech troubleshooting resource. With 15+ years in IT support, he created Techlogie to easily help users fix their own devices without appointments or repair costs. When not writing new tutorials, Davidson enjoys exploring the latest gadgets and their inner workings. He holds...