How to Replace Imaging Unit Xerox WorkCentre 6605: Step-by-Step Guide for Beginners

Are you experiencing faded or blurry prints from your Xerox WorkCentre 6605? This could be a sign that your imaging unit needs replacing. While it may seem daunting, replacing the imaging unit is a fairly straightforward process that can be done by anyone with a bit of patience and the right tools. This comprehensive guide will walk you through every step, ensuring you can get your printer back to producing crisp, high-quality prints in no time.

Understanding the Imaging Unit and its Importance

The imaging unit, also known as the drum cartridge, is a crucial component of your Xerox WorkCentre 6605. It’s responsible for transferring the toner image onto the paper, ultimately creating the final printed document. Over time, the imaging unit can wear down, leading to:

• Faded prints: This is a common sign of a worn-out imaging unit. The toner may not be transferring properly, resulting in pale or light prints.
• Blurry prints: If the imaging unit is damaged or scratched, it can cause blurry or uneven prints.
• Streaks or lines: These are often a sign that the imaging unit is nearing the end of its life. The toner may be sticking to the drum, creating streaks on the printed pages.
• Paper jams: A worn-out imaging unit can lead to paper jams as the paper may not feed smoothly through the printer.

Gathering the Necessary Supplies

Before you begin, ensure you have all the necessary supplies:

• New Xerox WorkCentre 6605 Imaging Unit: Always use genuine Xerox parts to ensure optimal performance and longevity of your printer.
• Gloves: Wearing gloves will prevent any toner from getting on your hands.
• A soft cloth: This will be used for cleaning any spilled toner or dust.
• A trash bag: This is for disposing of the old imaging unit properly.
• Optional: A small vacuum cleaner with a brush attachment: This can be helpful for cleaning up any toner spills.

Preparing for the Replacement

1. Turn off the printer: Make sure the printer is completely powered off before you begin.
2. Open the front cover: Locate the front cover of your Xerox WorkCentre 6605 and open it. You should see the imaging unit inside.
3. Remove the old imaging unit: Carefully remove the old imaging unit from the printer. It’s usually held in place by a lever or latch. Follow the instructions in your printer’s manual for specific removal procedures.
4. Dispose of the old imaging unit: Place the old imaging unit in a trash bag and dispose of it according to local regulations. Never attempt to refill or reuse an old imaging unit.

Installing the New Imaging Unit

1. Unpack the new imaging unit: Carefully remove the new imaging unit from its packaging.
2. Align the imaging unit: Make sure the imaging unit is properly aligned with the printer. There will be a designated slot for the imaging unit.
3. Insert the imaging unit: Slide the new imaging unit into the slot until it clicks into place.
4. Close the front cover: Close the front cover of the printer.

Final Steps and Troubleshooting

1. Turn on the printer: Power on your Xerox WorkCentre 6605.
2. Print a test page: Print a test page to ensure the new imaging unit is working correctly. If the print quality is good, you’re all set!
3. Troubleshooting: If the test page shows any issues, such as faded or blurry prints, you may need to:

• Check the toner level: Ensure that the toner cartridge is properly installed and has enough toner.
• Clean the imaging unit: If the imaging unit is dirty, it can affect print quality. Refer to your printer’s manual for cleaning instructions.
• Reset the imaging unit: Some imaging units require a reset after installation. Check your printer’s manual for instructions.

Essential Tips for Maintaining Your Imaging Unit

• Avoid touching the imaging drum: The imaging drum is a sensitive component and can be easily damaged by fingerprints or dust.
• Store the imaging unit properly: If you’re not using the imaging unit immediately, store it in a cool, dry place away from direct sunlight.
• Replace the imaging unit regularly: Even if your printer is still producing acceptable prints, it’s a good idea to replace the imaging unit every 12-18 months. This will help ensure optimal print quality and prevent future problems.

Beyond Replacing: Maximizing Your Printer’s Lifespan

Replacing the imaging unit is one important step in maintaining your Xerox WorkCentre 6605. However, there are other crucial aspects to consider for maximizing the lifespan of your printer:

• Regular cleaning: Dust and debris can accumulate inside your printer, affecting its performance. Clean the printer regularly, following the instructions in your manual.
• Using genuine toner cartridges: Using non-genuine toner cartridges can damage your printer and void your warranty. Always use genuine Xerox toner cartridges for optimal performance.
• Proper paper handling: Using the correct paper type and handling it carefully can prevent paper jams and other problems.

Leaving You with a Crisp Print Finish

Replacing the imaging unit in your Xerox WorkCentre 6605 is a straightforward process that can significantly improve your printing experience. By following these steps, you’ll be able to enjoy crisp, clear prints once again. Remember to always use genuine Xerox parts and follow the recommended maintenance practices to ensure the longevity of your printer.

Questions We Hear a Lot

1. How often should I replace the imaging unit?
The recommended replacement interval for the imaging unit is every 12-18 months, or sooner if you experience print quality issues.
2. Can I refill the imaging unit?
Refilling an imaging unit is not recommended. It can damage the unit and lead to poor print quality. Always use a new, genuine Xerox imaging unit.
3. What are the signs of a worn-out imaging unit?
Common signs include faded prints, blurry prints, streaks or lines on printed pages, and paper jams.
4. Can I use a different brand of imaging unit?
It’s highly recommended to use only genuine Xerox imaging units. Using non-genuine parts can void your warranty and may damage your printer.
5. Where can I buy a new imaging unit?
You can purchase a new imaging unit from authorized Xerox dealers or online retailers. Always ensure you are buying a genuine Xerox part.