Your Guide to Laptop Confidence.

Expert Tips: How to Replace Surface Go Battery for Maximum Efficiency and Savings

Quick Overview

  • If you’re facing a declining battery life on your Surface Go, replacing the battery is often the best solution.
  • If your Surface Go battery drains significantly faster than before, even with minimal usage, it’s a strong indication of a failing battery.
  • Replacing your Surface Go battery is a great way to extend its lifespan, but there are also several other steps you can take to optimize battery life.

The Surface Go, with its compact design and impressive performance, has become a popular choice for many. But like any electronic device, its battery life can deteriorate over time, leading to frustratingly short usage periods. If you’re facing a declining battery life on your Surface Go, replacing the battery is often the best solution. This guide will walk you through the process of replacing your Surface Go battery, providing step-by-step instructions and helpful tips to ensure a smooth and successful replacement.

Assessing Your Battery’s Condition

Before embarking on the battery replacement journey, it’s crucial to determine if a new battery is indeed necessary. Here are some signs that your Surface Go battery might be nearing the end of its life:

  • Rapid battery drain: If your Surface Go battery drains significantly faster than before, even with minimal usage, it’s a strong indication of a failing battery.
  • Swollen battery: A bulging or swollen battery is a serious safety hazard and should be replaced immediately.
  • Erratic battery readings: Inconsistent battery percentage readings or sudden drops in battery life can also point to a faulty battery.

Gathering Your Tools and Supplies

To replace your Surface Go battery, you’ll need a few essential tools and supplies. Make sure to have the following ready:

  • A Phillips screwdriver: This is the most common type of screwdriver needed for most electronic devices.
  • A prying tool: A plastic opening tool or a thin, flat-head screwdriver can be used to gently pry open the device.
  • A replacement battery: Ensure you purchase a compatible battery specifically designed for the Surface Go model you own.
  • A clean, flat surface: This will provide a safe and organized workspace for the replacement process.

Disassembling Your Surface Go

Now that you have your tools and supplies ready, it’s time to carefully disassemble your Surface Go.
1. Power off your Surface Go: Before you start, ensure your Surface Go is completely powered off.
2. Remove the kickstand: Gently detach the kickstand from the back of the device.
3. Unscrew the back panel: Locate the screws securing the back panel and carefully remove them using your Phillips screwdriver.
4. Gently pry open the back panel: Using your prying tool, carefully pry open the back panel, starting from one corner. Work your way around the panel, applying gentle pressure until it releases.

Replacing the Battery

Once you’ve successfully removed the back panel, you’ll have access to the battery.
1. Disconnect the battery connector: Locate the battery connector and carefully disconnect it. You may need to use your prying tool to gently lift the connector.
2. Remove the old battery: Once the connector is disconnected, you can carefully remove the old battery from its housing.
3. Insert the new battery: Align the new battery with its housing and gently press it into place.
4. Reconnect the battery connector: Connect the battery connector to its corresponding port on the motherboard.

Reassembling Your Surface Go

With the new battery installed, you’re ready to reassemble your Surface Go.
1. Secure the back panel: Align the back panel with the device and carefully press it into place.
2. Screw in the back panel: Reinstall the screws that you removed earlier, ensuring they are securely tightened.
3. Reattach the kickstand: Attach the kickstand back to its original position on the back of the device.

Testing Your New Battery

Once you’ve reassembled your Surface Go, it’s important to test the new battery to ensure it’s working correctly.
1. Power on your Surface Go: Turn on your device and observe its performance.
2. Charge the battery: Plug in your Surface Go and allow the battery to fully charge.
3. Monitor battery life: After a full charge, monitor the battery life and compare it to the previous battery‘s performance.

Tips for Extending Battery Life

Replacing your Surface Go battery is a great way to extend its lifespan, but there are also several other steps you can take to optimize battery life:

  • Adjust power settings: Reduce screen brightness, disable unnecessary background processes, and adjust power settings to conserve battery.
  • Close unused applications: Close apps that you’re not actively using to prevent them from draining battery in the background.
  • Use power-saving mode: Enable power-saving mode when you’re on the go to extend battery life.
  • Avoid extreme temperatures: Battery performance can be affected by extreme temperatures. Avoid exposing your Surface Go to excessive heat or cold.

A Final Word on Battery Replacement

Replacing your Surface Go battery can be a straightforward process, but it’s essential to exercise caution and follow the steps carefully. If you’re not comfortable with the process, it’s best to seek professional help from a qualified technician. By following these instructions and taking proper precautions, you can ensure a successful battery replacement and enjoy extended use of your Surface Go.

Information You Need to Know

Q: What is the average lifespan of a Surface Go battery?
A: The average lifespan of a Surface Go battery is around 2-3 years. However, this can vary depending on usage patterns, charging habits, and environmental factors.
Q: Can I use a generic battery instead of an original Surface Go battery?
A: While generic batteries might be cheaper, they may not be compatible with your Surface Go or offer the same performance and reliability as an original battery. It’s always recommended to use a genuine Surface Go battery for optimal results.
Q: What should I do if my Surface Go battery is swollen?
A: A swollen battery is a safety hazard and should be replaced immediately. Do not attempt to use the device with a swollen battery. Contact Microsoft support or a qualified technician for assistance.
Q: Can I replace the battery myself, or should I take it to a repair shop?
A: While you can replace the battery yourself, it’s important to be comfortable with the process and have the necessary tools and experience. If you’re unsure, it’s best to take your Surface Go to a qualified repair shop for professional assistance.
Q: How do I dispose of my old Surface Go battery safely?
A: Batteries contain hazardous materials and should be disposed of properly. Check with your local waste management facility or electronics recycling program for information on safe disposal methods.

Was this page helpful?No
D
About the Author
Davidson is the founder of Techlogie, a leading tech troubleshooting resource. With 15+ years in IT support, he created Techlogie to easily help users fix their own devices without appointments or repair costs. When not writing new tutorials, Davidson enjoys exploring the latest gadgets and their inner workings. He holds...