How To Reset Your Brother Hl-l2370dw: A Simple Guide!
What To Know
- Your printer will reset all of the settings, including the network settings, to the factory defaults.
- You can back up your settings by connecting your brother printer to your computer using a USB cable and using your brother printer’s software.
- Although a factory reset can be performed without a computer, it is recommended to use a computer for the initial setup and installation of the printer after performing the reset.
If you’re having issues with your Brother HL-L2370DW, such as paper jams or print quality problems, you may need to reset the device. Resetting the printer can help clear any errors and allow you to start fresh. In this blog post, we’ll show you how to reset your Brother HL-L2370DW in a few simple steps.
How To Reset Brother Hl-l2370dw
First, unplug the power cord from the back or side of your printer. Then, press and hold down the “Go” button on your printer for about 3 seconds. After that, plug the power cord back into your brother printer. Finally, release the “Go” button and press the “Go” button once. Your printer should now reset and be ready to be used again.
This process will reset your brother printer back to factory default settings. Your printer will reset all of the settings, including the network settings, to the factory defaults. Any changes that you have made to your printer settings will be erased.
You can also reset your brother printer using the menu buttons on your printer. To reset your brother printer using the menu buttons, follow these steps:
Press the “Menu” button on your printer. Then, use the up and down arrow keys to select “Network” and press “Enter”. After that, use the up and down arrow keys to select “Factory Reset” and press “Enter”. Finally, use the up and down arrow keys to select “OK” and press “Enter”. Your brother printer will now reset and be ready to be used again.
Remember that resetting your brother printer will erase all of your printer’s settings. So, before you reset your printer, you should make sure that you have all of your settings backed up. You can back up your settings by connecting your brother printer to your computer using a USB cable and using your brother printer’s software.
How Do I Factory Reset My Brother Hl-l2370dw?
- 1. Press the Menu button on the Brother HL-L2370DW control panel.
- 2. Use the Up or Down arrow button to select “Settings,” then press the OK button.
- 3. Use the Up or Down arrow button to select “All Settings,” then press the OK button.
- 4. Use the Up or Down arrow button to select “Initial Setup,” then press the OK button.
- 5. Use the Up or Down arrow button to select “Factory Reset,” then press the OK button. The machine will prompt you to confirm that you want to proceed with the factory reset.
How Do I Reset My Brother Hl-l2370dw Without A Computer?
To reset your brother HL-L2370DW without a computer, follow these steps:
1. Make sure the printer is turned off.
2. Press and hold down the “Go” button while turning the printer on.
3. Continue holding the “Go” button until the green power light flashes once and then remains on.
4. Release the “Go” button.
5. Press the “Up” arrow button until the printer’s LCD displays “Machine Reset?”
6. Press the “Color/Black” button to select “Yes” to reset the printer.
7. Press the “Go” button to start the printer’s reset process.
8. Wait for the printer to complete the reset process, which should take about 60 seconds.
9. Once the printer has finished resetting, it will restart automatically.
Please note that performing a factory reset will clear all current settings, including network settings, fax settings, and all installed print jobs. Make sure you have the necessary settings, network information, and fax numbers ready before proceeding with the reset.
Note: Although a factory reset can be performed without a computer, it is recommended to use a computer for the initial setup and installation of the printer after performing the reset.
How Do I Reset My Brother Hl-l2370dw Network Settings?
To reset the network settings of your Brother HL-L2370DW, follow these instructions:
1. Press the “Menu” button on your Brother printer’s control panel.
2. Using the arrow keys, navigate to the “Network” or “Network Configuration” option and press “Enter.”
3. Select the “WLAN” or “Wireless” option and press “Enter.”
4. Select “OK” to confirm you want to reset the network settings.
5. Press the “Up” or “Down” arrow key to select “Yes” and press “Enter.”
Your Brother printer will now begin the reset process. It may take a few minutes for the printer to reboot and for the network settings to be reset. Once the printer has finished rebooting, you can try to reconnect it to your wireless network using the printer’s control panel or a computer connected to the same network.
If you encounter any issues during the reset process, you can try resetting the printer to its factory defaults. To do this, press the “Menu” button again and select “Machine Settings.” Select the “Reset” option and follow the on-screen instructions.
How Do I Reset My Brother Hl-l2370dw Wireless Settings?
To reset the wireless settings on your Brother HL-L2370DW, you can follow these steps:
1. Press the menu button on your Brother HL-L2370DW printer.
2. Use the up and down arrow keys to scroll to “Network” and then press OK.
3. Use the up and down arrow keys to scroll to “WLAN” and then press OK.
4. Use the up and down arrow keys to scroll to “Setup Wizard” and then press OK.
5. Use the up and down arrow keys to scroll to “Reset” and then press OK.
6. Use the up and down arrow keys to scroll to “Yes” and then press OK.
7. The wireless settings on your Brother HL-L2370DW will now be reset.
Note: Please ensure you have your wireless network name (SSID) and security key (password) handy before resetting the wireless settings.
How Do I Reset My Brother Hl-l2370dw Ip Address?
To reset the IP address of your Brother HL-L2370DW printer, you will need to follow these steps:
1. Power off the printer and unplug the power cord from the printer and wall outlet.
2. Press and hold the ‘Go’ button while reconnecting the power cord.
3. Continue to press the ‘Go’ button for 2 seconds, then release the ‘Go’ button.
4. The power light will start to blink.
5. While the light is still blinking, press the ‘Go’ button 7 times within 2 seconds.
6. The power light will turn off.
7. Power on the printer.
8. Wait for the printer to initialize.
9. The printer will restart automatically and the IP address will be reset to the default.
Please note that the IP address will be set to the default 192.168.1.1. You will need to change the IP address of the printer to your desired IP address.
Note: The above steps are for resetting the IP address of the Brother HL-L2370DW printer.
Summary
In conclusion, the Brother HL-L2370DW is a reliable and high-quality printer that is perfect for both home and office use. It is easy to set up and use, and it offers a variety of features that make it a great choice for any user. If you are looking for a new printer, the Brother HL-L2370DW is definitely worth considering.
