How To Reset Your Brother Mfc J480dw: A Step-by-step Guide

Brother MFC J480dw is an all-in-one printer that offers printing, scanning, copying, and faxing capabilities. It is an affordable printer that is suitable for home or small office use. However, sometimes you may encounter issues that need to be fixed by resetting the printer. In this article, we will show you how to reset the Brother MFC J480dw.

How To Reset Brother Mfc J480dw

If you have forgotten the password for your Brother MFC-J480dw printer, you can reset it by following these steps:

1. Press the “Menu” button on the printer’s control panel.

2. Use the up and down arrows to select “Set Up,” then press “OK.”

3. Use the up and down arrows to select “All Settings,” then press “OK.”

4. Use the up and down arrows to select “Initial Setup,” then press “OK.”

5. Use the up and down arrows to select “Reset,” then press “OK.”

6. Use the up and down arrows to select “All,” then press “OK.”

7. Press the “Up” or “Down” arrow to select “Yes,” then press “OK.”

8. Press “Stop/Exit” to exit the menu.

Your printer should now be reset and ready to use. You will need to set up your printer again, including setting a new password.

How Do I Reset My Brother Mfc J480dw Printer?

• 1. Unplug the power cord from the back of the printer and let it sit for 60 seconds.
• 2. Plug the power cord back into the printer and turn it on.
• 3. Press the “menu” button on the front of the printer.
• 4. Use the arrow keys to navigate to the “Setup” menu and press “Enter.”
• 5. Use the arrow keys to navigate to the “Restore Factory Defaults” option and press “Enter.”
• 6. Press the “1” button to confirm and restore the factory defaults.
• 7. After the restore is complete, use the arrow keys to navigate back to the “Setup” menu and press “Enter.”
• 8. Use the arrow keys to navigate to the “Exit” menu and press “Enter.”
• 9. Press the “OK” button to exit and the printer will restart.
• 10. Once restarted, the printer will be restored to factory defaults.

What Is The Process To Reset My Brother Mfc J480dw Printer?

Resetting your brother MFC J480dw printer is a quick and easy process. Here are the steps to follow:

1. Press and hold the “Go” button for three seconds until the LED lights up.

2. Press the “Up” arrow key four times, then press the “Down” arrow key three times.

3. Press the “Go” button again.

Your printer should now be reset.

Note: If your printer is not responding after following these steps, you can try unplugging the power cord for 10 seconds and then plugging it back in.

What Are The Steps To Reset My Brother Mfc J480dw Printer?

To reset your brother MFC J480dw printer, follow these easy steps:

1. Press the menu button on your printer’s control panel.

2. Using the arrow keys, navigate to the network menu and then press ok to select it.

3. Use the arrow keys to navigate to the “WLAN” option and then press ok to select it.

4. Press the up arrow button until you see “Reset”.

5. Press ok to start the printer reset process.

6. Wait for the printer to finish resetting and then follow the on-screen prompts to complete the setup process.

Note: Make sure your printer is connected to the Internet before resetting.

How Long Does The Reset Process Take On My Brother Mfc J480dw Printer?

The reset process on your brother MFC J480dw printer will normally take about 60 seconds to complete. However, the actual time may vary depending on the specific model of your printer and the version of the firmware that you are using.

To reset your brother MFC J480dw printer, you will need to power off the printer and then unplug the power cord from the printer. Once this is done, you will need to hold down the “Menu” and “Clear/Back” buttons at the same time for about 5 seconds.

After holding the buttons for 5 seconds, you will need to plug the power cord back into the printer and then press the power button to turn on the printer. The printer should now be in the reset process and will beep once to let you know it has finished.

You can check the status of the reset process by looking at the LCD display on the printer. The display should show a message that says “Please Wait” and then it will show a message that says “Ready” when the reset process is complete.

It is important to note that the reset process will erase all saved settings and configurations for the printer, so you will need to reestablish your connection and settings after the reset is complete.

If you have any additional questions or concerns about the reset process on your brother MFC J480dw printer, you can refer to the user manual or contact Brother customer support for assistance.

Are There Any Side Effects Or Risks Associated With Resetting My Brother Mfc J480dw Printer?

When resetting your brother MFC J480dw printer, you need to be aware of the following side effects and risks associated with the process:

1. Loss of Settings: By resetting your brother printer, you could potentially lose all your customized settings, including your Wi-Fi network settings, scan settings, fax settings, and any custom print settings.

2. Network Connectivity Issues: Depending on your network configuration, resetting your brother printer could cause connectivity issues with your Wi-Fi network. You would need to re-enter your Wi-Fi password and configure the necessary settings to establish a new connection.

3. Factory Reset: In some cases, performing a factory reset on your brother printer could cause it to return to its default settings, which could alter the print quality or paper size settings.

4. Data Loss: If the printer is connected to a computer via USB, you could lose all the data stored on the printer’s memory.

5. Printer Malfunction: In some cases, performing a reset on your brother printer could inadvertently cause the printer to malfunction or stop working entirely, requiring professional assistance to resolve the issue.

It’s important to note that these side effects and risks are not universal and can vary based on the specific model of your brother printer and the specific circumstances under which you perform the reset.

Wrap-Up

In conclusion, the Brother MFC J480DW is a versatile and user-friendly device that offers a wide range of features and capabilities. Whether you are looking to print, scan, or copy, the Brother MFC J480DW has got you covered. However, if you are experiencing any issues with your device, such as a paper jam or connectivity problems, you may need to reset it. Fortunately, the process is simple and can be done in just a few minutes. Just follow the steps outlined above, and you should be up and running in no time.