How To Reset Your Canon Pixma Mg2522 To Its Factory Settings – A Step-by-step Guide

If you’re like me, your printer is probably one of the most important pieces of equipment in your home. It’s how I print my important documents, and it’s how I keep in touch with my friends and family. But sometimes, your printer can start to act up. If you’re having trouble with your Canon PIXMA MG2522, then I’m here to help.

How To Reset Canon Pixma Mg2522

Canon PIXMA MG2522 is one of the most popular printers, and it offers a lot of features. However, sometimes you may encounter problems while using it, and you may need to reset it. In this article, we will show you how to reset Canon PIXMA MG2522.

Canon PIXMA MG2522 Reset

To reset Canon PIXMA MG2522, follow these steps:

1. Turn off your printer.

2. Press and hold the “Stop” button for about 3 seconds.

3. While holding the “Stop” button, press and hold the “Power” button for about 1 second.

4. Release the “Power” button, and release the “Stop” button.

5. Your printer should now be reset.

Note: If you follow the steps correctly, your printer should now reset. However, if your problem persists, you may need to contact Canon customer support for assistance.

How Do I Reset My Canon Pixma Mg2522 Ink Cartridge?

• 1. Turn off your printer and unplug it.
• 2. Open the printer’s lid to access the ink cartridges.
• 3. Press down on the ink cartridge that you want to replace to release it.
• 4. Remove the old ink cartridge and throw it away.
• 5. Insert the new ink cartridge and close the printer’s lid.
• 6. Plug the printer back in and turn it on.
• 7. The printer should recognize the new ink cartridge and allow you to continue printing.
• 8. If it does not, you may need to manually insert the ink cartridge into the printer.
• 9. Once the ink cartridge is inserted, the printer should automatically reset it and allow you to continue printing.
• 10. If it does not, you may need to manually reset the ink cartridge by following the instructions in your printer’s manual.

How Do I Reset My Canon Pixma Mg2522 Wireless Settings?

You can reset your Canon PIXMA MG2522 wireless settings by following these steps:

1. Power off the printer.

2. Press and hold the Stop button.

3. Press and hold the Power button.

4. Release the Stop button.

5. Wait for the printer to reboot.

6. Press the Stop button twice.

7. Press the Power button twice.

8. Wait for the printer to reboot.

9. Press the Stop button once.

10. Press the Power button once.

11. Wait for the printer to reboot.

12. Press the Stop button twice.

13. Press the Power button twice.

14. Wait for the printer to reboot.

15. Press the Stop button once.

16. Press the Power button once.

17. Wait for the printer to reboot.

18. Press the Stop button twice.

19. Press the Power button twice.

20. Wait for the printer to reboot.

21. Press the Stop button once.

22. Press the Power button once.

23. Wait for the printer to reboot.

24. Press the Stop button twice.

25. Press the Power button twice.

26. Wait for the printer to reboot.

27.

How Do I Reset My Canon Pixma Mg2522 Paper Jam Error?

To reset the Canon Pixma MG2522 paper jam error, you can follow these steps:

1. Make sure that your printer is turned off.

2. Open the printer cover and remove any paper that is jammed inside.

3. Close the printer cover and turn the printer back on.

4. Wait for the printer to finish initializing.

5. Press and hold the “Resume” button until the LED lights up.

6. Release the “Resume” button and wait for the printer to print a test page.

7. If the test page prints successfully, the paper jam error has been cleared.

If the paper jam error persists, you may need to contact Canon customer support for further assistance. They may be able to provide additional troubleshooting steps or recommend that you send the printer in for repair.

How Do I Reset My Canon Pixma Mg2522 Ink Absorber?

Canon Pixma MG2522 is an inkjet printer. Canon printers have a waste ink absorber that collects excess ink during the printer’s cleaning cycles. Over time, the waste ink absorber can become full and need to be reset to continue printing.

To reset the Canon Pixma MG2522 ink absorber, follow these steps:

1. Turn off the printer.

2. Press and hold the “Stop” button, then press and release the “Power” button.

3. Continue holding the “Stop” button and press the “Power” button 2 more times.

4. Release the “Stop” button. The printer should now be in Service Mode.

5. Press the “Color” button 4 times, then release the “Color” button.

6. Press the “Black” button 5 times, then release the “Black” button.

7. Press the “Color” button 1 time, then release the “Color” button.

How Do I Reset My Canon Pixma Mg2522 Print Settings?

To reset the Canon Pixma MG2522 print settings, follow these steps:

1. Disconnect the printer from the power supply.

2. Press and hold the power button for about 15 seconds.

3. Reconnect the power supply and turn the printer back on.

4. Once the printer is turned on, press the Stop button two times.

5. Press the Stop button four times.

6. Press the Stop button six times.

7. Press the Stop button seven times.

8. Your Canon Pixma MG2522 should now be reset to the original factory settings.

Note: These steps are applicable to Canon Pixma MG2522 printers.

In a nutshell

In conclusion, resetting your Canon PIXMA MG2522 is a quick and easy process that can help you troubleshoot any issues with your printer. By following these simple steps, you can get your printer back up and running in no time.