Learn How To Reset Your Canon Printer Ts5150 In Just 3 Easy Steps!

Hello, everyone! Today, we’re going to take a look at how to reset the Canon printer TS5150. If you’re having trouble with your printer, or just want to clear its memory, this can be a helpful process. We’ll go over the steps you need to take to reset your printer, as well as some tips for troubleshooting any issues you may encounter. Let’s get started!

How To Reset Canon Printer Ts5150

The Canon PIXMA TS5150 printer is a wireless printer, which makes it convenient to use. However, sometimes you may encounter problems when using it.

If your PIXMA TS5150 printer has a problem, you may need to reset it. This can be done easily by following the instructions below:

1. Power off your printer and unplug the power cord.

2. Press and hold the power button for 5 seconds.

3. Plug the power cord back in, and then press and hold the power button for 5 seconds.

4. Release the power button and wait for the printer to start up.

5. Your printer should now be reset.

Note: Resetting your printer will delete all the settings, so you will need to set them back up. This includes setting up your wireless network, configuring your printer, and setting your print settings.

If your PIXMA TS5150 printer still does not work, you may need to contact Canon customer service for assistance. They will be able to help you troubleshoot the problem and find a solution.

What Are The Steps To Reset A Canon Printer?

• 1. Power off the printer and unplug the power cord from the power outlet.
• 2. Press and hold the Power button for about 30 seconds.
• 3. Release the Power button and plug the power cord back into the power outlet.
• 4. Press the Power button to turn the printer back on.
• 5. The printer will perform a reset and will be ready to be used again.

How Do I Reset My Canon Printer To Factory Settings?

Canon printers are known for their high-quality printing and reliable performance, but sometimes you may need to reset your printer to its factory settings in order to correct an error or restore it to its initial state.

To reset your Canon printer to factory settings, follow these steps:

1. Power off the printer and disconnect it from the power source.

2. Press and hold the “Stop/Reset” button (on the printer’s control panel) for approximately 5 seconds.

3. While still holding the “Stop/Reset” button, reconnect the printer to the power source and turn it on.

4. Release the “Stop/Reset” button. The printer should now be in “Service Mode.”

5. Press the “Stop/Reset” button two more times.

6. Press the “Color/Black” button.

7. Press the “Stop/Reset” button one final time. The printer should now be reset to its factory settings.

It’s important to note that resetting your printer to factory settings will erase all custom settings, such as custom paper sizes and print settings, and you will need to reconfigure the printer from scratch. Additionally, resetting the printer will also remove any saved documents or scanned images stored on the printer’s memory.

Resetting your Canon printer to factory settings is a relatively simple process, but it can be helpful if you’re experiencing issues with your printer or if you’re preparing to sell or give it away.

How Do I Reset My Canon Printer Without Using The Buttons?

1. Hold down the power button on your Canon printer for about 3 seconds.

2. Wait for the printer to turn off and then press and hold the stop button for about 10 seconds.

3. Wait for the printer to turn on and then release the stop button.

4. The printer should now be reset and ready to use.

Note: This process may not work for all Canon printers, so you may need to consult the manual for your specific model.

How Do I Reset My Canon Printer Without Unplugging It?

The Canon printer comes with a reset feature that allows the user to reset the printer without unplugging it. Here are the steps to reset the Canon printer:

Step 1: Open the cartridge access door of the printer.

Step 2: Hold down the Stop/Reset button.

Step 3: Press and hold the Power button.

Step 4: Release the Power button but continue holding the Stop/Reset button.

Step 5: Release the Stop/Reset button.

Step 6: Close the cartridge access door.

Step 7: Press the Power button to turn on the printer.

Step 8: Press the Stop/Reset button twice.

Step 9: Press the Power button to turn off the printer.

Step 10: Press the Power button to turn on the printer.

The reset process is complete. The printer should now be reset to its original settings.

How Do I Reset My Canon Printer If It Says Error?

To reset your Canon printer if it displays an error code, follow these steps:

1. Turn off your printer and unplug the power cord from the wall outlet.

2. Press and hold the power button on your printer for about 30 seconds to drain any residual power from the device.

3. Reconnect the power cord and turn on the printer.

4. Wait for the printer to finish initializing and open the printer’s control panel.

5. Press and hold the Stop/Reset button on your printer for 5 seconds to clear the error.

6. Release the Stop/Reset button and wait for the printer to complete its reset.

7. Try printing again to see if the error has been resolved.

If the above steps do not resolve the issue, you may need to contact Canon customer support or visit their official website for further assistance.

Final Thoughts

In conclusion, the Canon PIXMA TS5150 printer can be reset by following a few simple steps. First, locate the “Reset” button on your printer and hold it for five seconds. Then, press the “Stop” button twice. Finally, press the “Power” button to turn on the printer. Your Canon PIXMA TS5150 should now be reset and ready to use.