How To Set Up Your Razer Tartarus V2 Like A Pro: The Ultimate Guide

Razer Tartarus V2 is a great gaming keypad, but it can be tricky to set up. In this article, we will show you how to set up Razer Tartarus V2. We’ll go over the keybindings, profiles, and other settings that you can customize. By the end of this article, you’ll be a pro at using your Razer Tartarus V2. So, let’s get started!

How To Setup Razer Tartarus V2

Razer Tartarus V2 is the gaming keypad that comes with a thumb pad and 15 programmable keys. It has an ergonomic design and is lightweight. Setting up the Razer Tartarus V2 is easy and can be done in a few steps.

First, you need to download the Razer Synapse software. This software allows you to customize the keys and adjust the settings of the keypad. Next, you need to plug in the keypad and connect it to your computer.

Once the keypad is connected, the Razer Synapse software will automatically launch. You should find a dialog box that guides you through the initial setup process, allowing you to configure your keys and adjust the settings.

Once the setup process is complete, you can start using the keypad. The keys are programmable, so you can set them up to perform different actions. For example, you can set one key to launch a specific program, and another key to toggle between full-screen and windowed mode.

The thumb pad is also customizable. You can set it to perform different functions, such as scrolling or zooming.

How Do I Install The Razer Tartarus V2 Driver?

• 1. Connect the Razer Tartarus V2 to your PC.
• 2. Open Razer Synapse, or click (click Razer Synapse icon on your desktop).
• 3. Go to “Controller Settings”.
• 4. Click on “Controller Configuration“.
• 5. Under “Driver Control” tab, find the “Razer Tartarus V2” section.
• 6. Click on the “Install” button to install the Razer Tartarus V2 driver.

How Do I Connect My Razer Tartarus V2 To My Computer?

Razer Tartarus V2 can be connected to your computer using a USB cable. First, make sure the Tartarus V2 is turned off. Then, plug the USB cable into the USB port on your computer. Next, plug the other end of the USB cable into the USB port on the Tartarus V2.

Once the Tartarus V2 is connected to your computer, you can turn it on and start using the software. The software can be downloaded from the Razer website. Once you have installed the software, you can open the software and follow the instructions to set up the Tartarus V2.

Once the Tartarus V2 is set up, you can use it to control your computer. To use the Tartarus V2, simply press the buttons on the keypad to perform actions on your computer. You can also use the scroll wheel to navigate through menus and select options.

The Tartarus V2 is a great keyboard for gamers. It has a built-in gaming mode that allows you to quickly access the gaming controls. The Tartarus V2 is also programmable, so you can customize the keys to suit your specific needs.

How Do I Calibrate My Razer Tartarus V2?

To calibrate your Razer Tartarus V2, follow these steps:

1. Connect your Razer Tartarus V2 to your computer using a USB cable.

2. Open Razer Synapse, Razer’s configuration software.

3. Click on the “Controller” tab, and then on “Controller Calibration.”

4. Follow the on-screen instructions to calibrate your Razer Tartarus V2.

5. To calibrate the thumbpad, press and hold the “Thumbpad Calibration” button for three seconds. A menu will appear that allows you to adjust the sensitivity and deadzone of the thumbpad.

6. To calibrate the button mapping, click on the “Button Remapping” tab, and then click on “Add New Remap.” You can then use the on-screen buttons to remap the buttons.

7. To calibrate the DPI settings, click on the “DPI” tab, and then adjust the DPI levels using the on-screen slider.

8. You can also adjust the lighting and brightness of your Razer Tartarus V2 by clicking on the “Lighting” tab and adjusting the corresponding sliders.

How Do I Adjust The Dpi On My Razer Tartarus V2?

To adjust the DPI on a Razer Tartarus V2, follow these steps:

1. Press the scroll wheel on the mouse.

2. Hold down the DPI button on the bottom of the mouse.

3. While holding the DPI button, use the scroll wheel to adjust the DPI setting to the desired level.

4. Release the DPI button to save the setting.

The DPI setting can be adjusted between 100 and 16,000 DPI in increments of 100.

Note: The DPI setting can be adjusted on the fly, without the need to reboot the mouse.

How Do I Customize The Buttons On My Razer Tartarus V2?

You can customize the buttons on your Razer Tartarus V2 by using Razer’s Synapse software. This software allows you to remap the buttons on your keyboard, as well as set up macros and other customizations.

To customize the buttons on your Razer Tartarus V2, follow these steps:

1. Download and install Razer Synapse software from Razer’s website.

2. Launch Razer Synapse and connect your Razer Tartarus V2 to your computer using a USB cable.

3. Once the device is connected, Razer Synapse will automatically recognize it.

4. Click on the “Profile” tab in the main interface of Razer Synapse.

5. Select the “Tartarus V2” from the list of devices.

6. Click on the “Keymap” tab to customize the keymap of your Razer Tartarus V2.

7. Click on the button you want to customize, and a drop-down menu will appear with a list of actions that you can assign to that button.

8. Select the desired action from the drop-down menu, and then click on “Apply” to save the changes.

You can also create macros by combining multiple actions into a single button, and customize other settings such as the key lighting, polling rate, and more.

Final Note

The Razer Tartarus V2 is an excellent gaming keypad for any PC gamer. It has a lot of features, including 32 fully programmable keys, a programmable thumb pad, and customizable backlighting. The keypad is also very comfortable to use, thanks to its ergonomic design and soft-touch coating. Overall, the Razer Tartarus V2 is a great investment for any PC gamer looking to improve their gameplay.