How To Set Up Wifi On Your Brother Hl-l2370dw: A Step-by-step Guide
What To Know
- This quick guide will walk you through the steps you need to take to get your Brother printer connected to your network, so you can start printing wirelessly.
- To set it up wirelessly, you will need to connect the printer to your computer using an Ethernet cable, and then install the printer’s software on your computer.
- If you are unable to connect your HL-L2370DW printer to a wireless network, you can try restarting both the printer and your computer, and then repeating the steps above.
Setting up your Brother HL-L2370DW to connect to your wireless network is a simple process that can be completed in just a few minutes. This quick guide will walk you through the steps you need to take to get your Brother printer connected to your network, so you can start printing wirelessly.
How To Setup Wifi On Brother Hl-l2370dw
Brother HL-L2370DW is a printer that can be set up easily using its LCD display or your computer. To set it up wirelessly, you will need to connect the printer to your computer using an Ethernet cable, and then install the printer’s software on your computer. Once the software is installed, you can disconnect the Ethernet cable and connect your printer to your wireless network.
To set up your Brother HL-L2370DW wirelessly:
1. Connect the printer to your computer using an Ethernet cable.
2. Turn on your computer and the printer.
3. Install the printer’s software on your computer.
4. Once the software is installed, you can disconnect the Ethernet cable.
5. Go to your printer’s LCD display and select “Network”.
6. Select “WLAN” and enter your wireless network password.
7. Your printer should now be connected to your wireless network.
Note: If you do not have a wireless network, you will need to purchase a wireless router and set it up. Once you have a wireless network, you can connect your printer to it by following these instructions.
How Do I Connect My Brother Hl-l2370dw Printer To My Wireless Network?
- 1. Make sure your Brother HL-L2370DW printer is turned on and connected to your computer via USB.
- 2. On your computer, open the Brother printer driver and select the “Network” tab.
- 3. Click the “Wireless Network Setup” button and follow the instructions to connect your printer to your wireless network.
- 4. Once your printer is connected, you can disconnect the USB cable from your computer and your printer will continue to print wirelessly.
- 5. If you encounter any issues during the setup process, consult the Brother HL-L2370DW user manual or contact the Brother customer support for assistance.
What Steps Do I Need To Take In Order To Set Up My Brother Hl-l2370dw Printer On A Wireless Network?
Setting up your brother HL-L2370DW printer on a wireless network is a relatively straightforward process. Here are the steps you need to follow:
1. Power on your brother HL-L2370DW printer and connect it to your computer using a USB cable.
2. Install the printer driver on your computer by following the instructions in the installation CD or manual that came with the printer.
3. Open the printer driver on your computer and go to the “Printer Properties” or “Printer Setup” tab.
4. Select the “Network” or “Wireless” option, and then click on “Wireless Setup Wizard”.
5. Follow the on-screen instructions to set up your printer on a wireless network. You will need to enter your wireless network’s name (SSID) and password.
6. Once the setup is complete, your printer should be connected to your wireless network and you should be able to print wirelessly.
Note: If you are unable to connect your HL-L2370DW printer to a wireless network, you can try restarting both the printer and your computer, and then repeating the steps above.
What Type Of Wireless Network Do I Need To Have In Order To Use My Brother Hl-l2370dw Printer?
A wireless network allows you to print from any device connected to the same network. A wireless router serves as the central hub for your wireless network. To print from your Brother HL-L2370DW printer over a wireless network, you will need the following:
1. Wireless network: A wireless network allows devices to connect to the Internet without wires. You will require a wireless router that is connected to the modem and configured with a valid IP address.
2. Network name (SSID) and security key: Your printer and other devices must have access to the wireless network. The SSID is the name of your wireless network, while the security key or password is used to protect access.
3. Network interface: Your printer must have a built-in network interface that supports wireless printing. Most modern printers have this feature, but older models may not.
4. Wireless network settings: Your printer must be configured with the SSID and security key of your wireless network. This is usually done through the printer’s control panel or web interface.
5. Network drivers: Your printer may require additional network drivers to be installed on your computer. These drivers are usually provided by the manufacturer and can be downloaded from their website.
Once you have set up your wireless network and configured your printer, you should be able to print wirelessly from any device connected to the same network.
How Can I Ensure That My Brother Hl-l2370dw Printer Is Connected To My Wireless Network Securely?
This is to make sure that the brother printer is completely disconnected from the network.
To check the printer’s IP address, you must access the printer’s web-based management page. If the printer is connected to the network, it will display its IP address.
If the printer is not connected to the network, the IP address should be 0.0.0.0.
You can reset the IP address to 0.0.0.0 by changing the printer’s network settings.
This will allow the printer to connect to the network.
Are There Any Specific Settings That I Need To Adjust On My Brother Hl-l2370dw Printer In Order To Use It On A Wireless Network?
Yes, there are a few specific settings that you will need to adjust on your Brother HL-L2370DW printer in order to use it on a wireless network.
First, you will need to make sure that your printer is turned on and connected to your computer via USB. Then, you will need to install the Brother printer driver on your computer. Once the driver is installed, you will need to open the printer driver settings and click on the “Network” tab.
In the “Network” tab, you will need to select the “Wireless” option and then click on the “Scan” button to search for available wireless networks. Once you have located your network, you will need to enter the network name and password and then click on “Connect.”
Once you have connected your printer to your wireless network, you will need to go to the “Network” tab again and click on the “Wireless Settings” button. In the “Wireless Settings” window, you will need to select the “Infrastructure” option and then click on “Apply” to save the settings.
Finally, you will need to go to the “Wireless” tab again and click on the “Print Test Page” button to make sure that your printer is working properly.
Takeaways
In conclusion, setting up your Brother HL-L2370DW printer on a wireless network is a simple and straightforward process. By following these simple steps, you can enjoy the convenience of wireless printing from your laptop, smartphone, or tablet.
