How To Take Apart A Corsair K70: A Step-by-step Guide!
What To Know
- This is a bit more of a delicate process, as the switches may be soldered onto the keyboard PCB.
- To make it easier, you can try heating up the switch with a soldering iron and then gently prying it off with a screwdriver.
- Once the keyboard case is removed, you will be able to see the internal components of the keyboard.
If you’re a fan of Corsair keyboards, you’re probably familiar with the K70. This popular keyboard is known for its high-quality build, but its also known for its durability. However, even the best keyboards can eventually wear out, and when that happens, you’ll need to know how to take them apart so you can replace the parts.
How To Take Apart Corsair K70
Taking apart the Corsair K70 is a relatively simple process, with just a few steps to follow.
The first step is to remove the keycaps. This can be done by gently prying up the keycaps with a flathead screwdriver. The keycaps should pop off fairly easily.
Once the keycaps are removed, the next step is to remove the switches. This is a bit more of a delicate process, as the switches may be soldered onto the keyboard PCB. To make it easier, you can try heating up the switch with a soldering iron and then gently prying it off with a screwdriver.
Once the switches are removed, you should be able to remove the PCB from the keyboard. You may need to remove the screws that hold the keyboard together first.
Once the PCB is removed, you should be able to see the PCB and the keyswitches. The PCB will have some wires attached to it, and these will need to be unplugged before you can remove the board.
Once the PCB is removed, you should be able to see the switches. These will need to be desoldered, which can be done with a soldering iron and a solder sucker.
Once the switches are desoldered, you should be able to remove them from the PCB. This can be done by gently pulling them off.
Once the switches are removed, you should be able to see the PCB. This can now be removed from the keyboard.
That’s it! You’ve now successfully taken apart your Corsair K70 keyboard.
Note: This is only a general guide, and specific steps may vary based on the type of Corsair K70 keyboard you have. Always be sure to refer to your keyboard’s manual for more specific instructions.
What Are The Key Steps Involved In Taking Apart A Corsair K70?
- 1. Remove all keycaps and switches.
- 2. Unscrew the metal plate from the bottom case.
- 3. Remove the top case from the bottom case.
- 4. Disconnect all cables and connectors.
- 5. Carefully disassemble all components, paying attention to any screws or fasteners.
What Tools Do I Need To Take Apart A Corsair K70?
Corsair K70 is a mechanical gaming keyboard that is popular among gamers for its durability and performance. However, just like any other mechanical keyboard, it may require some maintenance from time to time. In order to take apart a Corsair K70, you will need the following tools:
1. A Phillips head screwdriver: This is the most commonly used screwdriver type for electronic devices. You will need it to remove the screws that hold the keyboard together.
2. A flat head screwdriver: This is used to remove the keycaps from the keyboard.
3. A plastic opening tool: This is used to help pry open the keyboard case.
4. A microfiber cloth: This is used to clean the insides of the keyboard.
5. A compressed air can: This is used to remove any dust or debris that may have accumulated inside the keyboard.
Once you have gathered these tools, it is time to start taking apart your Corsair K70. First, unplug the keyboard from your computer or gaming console. Then, locate the screws that hold the keyboard case together. These screws are usually located in the four corners of the keyboard. Remove the screws and set them aside in a safe place.
Once the screws have been removed, gently lift the keyboard case off of the base. Be careful not to remove any cables or connections. Once the keyboard case is removed, you will be able to see the internal components of the keyboard.
To clean the keyboard, start by wiping down the keys and the keycaps with a microfiber cloth. This will help to remove any dust or dirt that has accumulated over time. Next, use a plastic opening tool to pry open the keyboard case. Be careful not to damage any of the components inside. Use the compressed air can to remove any dust or debris that may have accumulated inside the keyboard.
Are There Any Parts Of The Corsair K70 That Should Not Be Removed?
Yes, there are a few parts of the Corsair K70 that should not be removed. These parts are essential for the proper functioning of the keyboard and tampering with them could damage the keyboard or cause it to malfunction. These include:
1. The screws that hold the keyboard together.
2. The switches themselves.
3. The stabilizers, which keep the keys stable.
4. The PCB, which carries the electrical connections between the switches and the rest of the keyboard.
If you remove any of these parts, the keyboard may not work properly or could even stop working entirely. Additionally, removing these parts could also void the warranty on the keyboard.
However, it is possible to replace the keycaps, switches, and stabilizers on the Corsair K70. These parts are often sold separately and can be replaced with aftermarket parts if desired.
If you are not comfortable with removing any of these parts, it is best to consult a professional or follow the instructions that come with the keyboard.
What Are The Potential Risks Associated With Taking Apart A Corsair K70?
Different keyboards have different features, such as Cherry MX switches, USB pass-through, and backlighting. These features can be appealing to some users, but they can also pose potential risks. For example, Cherry MX switches can wear out over time, and USB pass-through ports can accumulate dust and debris. Additionally, backlighting can cause eye strain and discomfort.
Corsair K70 keyboards also come with a software suite that allows users to customize the keyboard’s settings. However, this software can also pose potential risks. For example, the software could be vulnerable to malware or viruses, and it could contain bugs or glitches that could cause the keyboard to function incorrectly.
Finally, Corsair K70 keyboards can be expensive, and some users may not be willing to pay a premium price for a piece of equipment that they might not use frequently. Additionally, the keyboards’ features may not be compatible with certain operating systems or applications, which could limit their usefulness.
Overall, Corsair K70 keyboards can be great for users who are looking for a high-quality keyboard with advanced features. However, they also come with potential risks that users should be aware of before purchasing.
Are There Any Precautions That Should Be Taken Before Taking Apart A Corsair K70?
Before taking apart your Corsair K70 or any mechanical keyboard, you should consider the following precautions:
1. Unplug the keyboard: Make sure the keyboard is unplugged from any power source before you start disassembling it. This will help prevent you from getting an electric shock while working on it.
2. Take photos: Before you start taking apart your keyboard, it’s a good idea to take photos of the internal components for reference. This can help you remember how everything fits back together when you’re done.
3. Use a static wristband: Since you’ll be working with electronic components, it’s essential that you take steps to prevent static electricity from damaging them. A static wristband can help ground you and prevent the buildup of static electricity.
4. Use the right tools: Make sure you have the correct tools for the job. A Phillips-head screwdriver is usually all you need for most mechanical keyboards. However, you may need additional tools for specialized components such as switches or keycaps.
5. Practice on a non-functional keyboard: If you’re new to taking apart mechanical keyboards, it’s a good idea to practice on an old or non-functional keyboard first. This will help you get a feel for the process of disassembling and reassembling the keyboard without the risk of damaging a functional one.
Final Thoughts
In conclusion, taking apart a Corsair K70 is a task that should not be taken lightly. It requires a careful hand and a bit of patience. But if you are up for the challenge, it can be a rewarding experience. Remember to take your time, be careful, and have fun.
